Use with CSA/UL Products) For Use with 004158, 004921, 003780, 003781, 04158, 04921, 03780, 03781...

Replacement part...

Replacement Part...

Replacement Part...

Replacement Part...

Float Bowl Gasket...

Replacement Part...

Replacement part...

Replacement part...

Replacement part...

Replacement Part...

Replacement Part...

Replacement part...

Output : 12 Volts DC @ 750mA Perfect for all lead-acid, flooded or sealed maintenance free batteries (AGM and gel cell). Complete 4-step charging program (Initialization, Bulk Charge, Absorption Mode and Float Mode). Automatically switches to float / maintenance voltage after fully charging the battery. If the battery voltage drops too far under l...

Weatherproof Input: 120VAC @ 60 Hz"SuperSmart" Technology Perfect for all lead-acid, flooded or sealed maintenance free batteries (AGM and gel cell). Spark Proof Short Circuit Protected Reverse Polarity Protected Weighs only 1 Pound Includes Alligator Clips and Ring Terminals Safety timer: 80 hrs. AC Power Cord Length: 6 ft.- 18 AWG DC Output Cor...

Switch Hi-Off-Low for Deluxe Thumb Warmer (902160) Control the intensity of the heat with Hi/Off/Low....

Fuel line inside diameter : 1/4" Flow rate : 11-12 Gallons/Hour...

Kimpex Universal Fuel Filter...

Kimpex Universal Fuel Filter...

Single Filament Halogen Lamp: Axial Filament...

Single Filament Halogen Lamp: Axial Filament...

Lumens: 565 Filament: C-6...

Xenon-gas-filled headlight bulbs, which produce a super-white HID-type headlight beam. The lenses have been optically dyed to transform the light into intense white beam which simulated the appearance of H.I.D. lighting system and produce superior, super-trick lighting over standard, dull headlight. HID lighting provides the brightest illumination ...

Effective at keeping hands warm Simple operation: Hi/Low/Off switch Easy installation on your handlebar Reference OEM No. 515-175-657 Sold by pair ...

Switch Hi-Off-Low for Thumb Warmer (912021) Control the intensity of the heat with Hi/Off/Low....

ISO 9001 and ISO 14001 KIMPEX is made with the same specifications and quality control as the top brand-names in batteries but at an affordable price, KIMPEX have reliable power to start up your engine at any time. KIMPEX is available for the most popular applications in DRY and SEALED battery type. Also available is the Factory Activated for the ...

These Heavy Mount Duty Pan Fittings are zinc plated and recessed for a flush surface. The 914017 is rated for a working load limit of 835lbs./380kgs. while the 914018 has a working load limit of 1,667lbs./756kgs.at 45 degrees of pull....

Hi/Lo temperature adjustment for both grip and thumb warmer. Adhesive backing for easy installation Included #902025 \ #912021 Volt : 13,5 V Number of watt at low intensity : 26,8 W Number of watt at hi intensity : 21 W Number of ampere at low intensity : 1.99 (ohms : 6,8) Number of ampere at hi intensity : 1.55 (ohms : 8,8) ...

High-performance, long life pistons Engineered to provide the best possible path for combustion chamber heat transfer to cylinder walls PTFE coated to create the least amount of friction during the break-in period All our pistons, wrist pins and circlips are manufactured to the original OEM specifications Our kits include: piston, ring(s), wrist p...

High-performance, long life pistons Engineered to provide the best possible path for combustion chamber heat transfer to cylinder walls PTFE coated to create the least amount of friction during the break-in period All our pistons, wrist pins and circlips are manufactured to the original OEM specifications Our kits include: piston, ring(s), wrist p...

High performance, long life. Die-cast models available. Engineered to provide the best possible path for combustion chamber heat transfer to cylinder walls....

These pontoon bunk brackets are precisely designed to give ultimate support for your boat. Manufactured from 11 gauge steel and hot dip galvanized for long lasting protection. Wide Bottom: 8,38" Wide Top: 15,68"...

The I-beam mounting kit allows you 1-1/2 in. square guide tube to securely mount onto any steel or aluminum I-beam trailer frame. The kit includes 4 brackets, 2 smaller 3/8 in. bolts and 2-3/8 in. bolts depending of frame rail width. Brackets are galvanized, hardware in zinc plated....

Complete kits to rebuild O.E. carburetors. Each kit contains all necessary parts, such as: jet needles, main and slow jets, float chamber gaskets, and float valves....

Kimpex crankshaft oil seal....

Kimpex crankshaft oil seal....

All Kimpex idler wheels are OEM replacements made with Kimpex quality. * To make sure you have the wheel you need to change, check the manufacturer's number (OEM), here below, is the same....

All Kimpex idler wheels are OEM replacements made with Kimpex quality. * To make sure you have the wheel you need to change, check the manufacturer's number (OEM), here below, is the same....

Pawl Lock for Rewind Starter...

Kimpex Slide Suspension Sliding Pad...

Leaf Spring Coupler Bushing Nylon Bombardier – 572.0501.00 1971-74 Blizzard, Nordic, TNT, Elan, Olympique, Skandic (Sold in quantities of 2) Priced Individually...

Rear Suspension Tension Adjustment Bolt Shape: Hexagon Length: 3" Net Diameter: 5/16" ...

Applications: All Kimpex or OEM gas suspension shocks. With 65mm O.D. nuts....

This kit includes 4 wear plates in stainless steel that avoid the water and dirt entering inside the a-arm bushings....

Rubber bulb in-line type primer complete with built-in check valves. Can be installed anywhere along fuel line. Universal...

Check the model of your carburetor stamped in the body mounting flange to get the right diaphragm and gasket set....

Tillotson HL/HR Diaphragm...

Flow Rate of 2.4 Gallons per Minute Intake Tube Length: 15.5 inch Discharge Hose Length of 18 inch \ 5.5 inch Nozzle Battery Loading Slot: Simple Slide off mechanism Simple Power Switch: Switch to on and you're ready to go Auto-Buzzer: Sounds when pump Automatically stops Auto-Stop Sensor Mechanism: Pump warns when it is at capacity, Protecting fr...

Give the vehicle’s switches some style with Kimpex Two-Position Rocker Switches! Able to be installed in a snap onto any 12V circuits vehicles and rated at 20 amps at 12V – 10 amps at 10V, these extremely durable and lightweight switches are tough enough to take any abuse in style! These switches come in a common size for an easy fit or flush m...

55 - Crankcase Oil Seal Sets : These sets contain crankshaft end seals and water pump seal. Refer to the chart to find your model. ...

711 - Professional Complete Gasket Sets with Oil Seals These sets include all gaskets, o-rings and oil seals necessary to rebuild the engine. ...

Refer to the chart to find your model....

41% Stronger Than OEM Made From 300M Grade Material Strengthens entire drivetrain ...

CE approved Black housing and rocker Single pole, single throw ON-OFF switch Five pin light switches Seven pin horn switch 2" x 1" surface size Standard mounting hole - 1.41" x .86" Upper light is ON when switch in pressed UP Lower LED is independent and can be wired to separate dash light circuit Both LEDS have separate grounds No rear barriers b...

Manufactured from a specially formulated fiber reinforced polychloroprene and aramid cord, the Dayco HP Outdoor Activity Belt delivers superior strength, enhanced dimensional integrity and stability for long lasting belt life in these applications....

Built for the most extreme machines, Dayco XTX ATV/UTV and Snowmobile belts are engineered for machines powered by 800cc and above engines. Engineered with specially-formulated, high temperature polychloroprene with the highest level of aramid fiber reinforcement available delivers track-churning performance for the most aggressive riders. This inn...

Built for the most extreme machines, Dayco XTX ATV/UTV and Snowmobile belts are engineered for machines powered by 800cc and above engines. Engineered with specially-formulated, high temperature polychloroprene with the highest level of aramid fiber reinforcement available delivers track-churning performance for the most aggressive riders. This inn...

Built for the most extreme machines, Dayco XTX ATV/UTV and Snowmobile belts are engineered for machines powered by 800cc and above engines. Engineered with specially-formulated, high temperature polychloroprene with the highest level of aramid fiber reinforcement available delivers track-churning performance for the most aggressive riders. This inn...

Quicker Throttle Response Reduced Belt Slippage through RPM Range Compound Allows for Quicker Upshifts & Downshifts for Improved Engine Braking ...